ARDEX X 260

· Ultra-high bond and slip resistance
· Good Workability; extended adjustment time
· Suitable for large-format tiles
· Eco-friendly formulation

INFORMATION
TECHNICAL DATA
DOWNLOADS

ARDEX X 260INFORMATION

ARDEX X 260 is a grey, cement-based tile adhesive for wall and floor applications. With a unique reinforced anti-slip formulation, it delivers exceptional slip resistance and bond strength—an ideal choice for installing large-format vitrified porcelain tiles, tiles of any water absorption, and non-moisture-sensitive stone. It is composed of high-grade cement, fine aggregates, high-strength polymers, and special additives.

ARDEX X 260TECHNICAL DATA

Technical Data
The following data were measured in a standard laboratory
environment at 23°C and 50% RH.
Fresh weight Approx. 1.61kg/L
Open time Approx. 30 minutes
Pot life Approx. 120 minutes
Bonding original strength ≥ 1.0 MPa
Water immersion ≥ 1.0 MPa
Heating ≥ 1.0 MPa
Freeze-thaw ≥ 1.0 MPa
Slip resistance ≤ 0.5mm

ARDEX X 260DOWNLOADS

TDS

CALCULATOR

STOCKIST LOCATOR

Binder product selection

Select product：

Tile area（㎡）：

Tile specifications（mm）：

Thickness（mm）：

Packing specifications：The product is recommended to have a specification of 25 kg/ 袋

Result

Needs kilograms：

Required unit：

Bag

The above calculation formula is based on the thin paste method, and the condition of ±3mm/2m (advance plastering) is required based on the wall and ground flatness. The roughness of the groove and base layer behind the tile will have a significant effect on the amount of binder used. The amount of loss is not taken into account. Values are for reference only. Please refer to the product manual for details.

TILE ADHESIVES

IMAGES AND VIDEOS