ARDEX X 220

· Wide compatibility across tile types
· High bond strength，Superior slip resistance
· Good workability
· Eco-friendly formulation

INFORMATION
TECHNICAL DATA
DOWNLOADS

ARDEX X 220INFORMATION

ARDEX X 220 is formulated from special cements, selected gradedaggregates, polymer modifiers, and specialty additives. It issuitable for interior and exterior installation of standard ceramic wall and floor tiles and for certain low-absorption tiles such as vitrified porcelain and mosaics.

ARDEX X 220TECHNICAL DATA

Technical Data
The following data were measured in a standard laboratory environment at 23°C and 50% RH.
Fresh weight Approx. 1.69kg/L
Open time Approx. 20 minutes
Pot life Approx. 120 minutes
Bonding original strength ≥ 0.5 MPa
Water immersion ≥ 0.5 MPa
Heating ≥ 0.5 MPa
Freeze-thaw ≥ 0.5 MPa
Slip resistance ≤ 0.5 mm

ARDEX X 220DOWNLOADS

TDS

CALCULATOR

STOCKIST LOCATOR

Binder product selection

Select product：

Tile area（㎡）：

Tile specifications（mm）：

Thickness（mm）：

Packing specifications：The product is recommended to have a specification of 25 kg/ 袋

Result

Needs kilograms：

Required unit：

Bag

The above calculation formula is based on the thin paste method, and the condition of ±3mm/2m (advance plastering) is required based on the wall and ground flatness. The roughness of the groove and base layer behind the tile will have a significant effect on the amount of binder used. The amount of loss is not taken into account. Values are for reference only. Please refer to the product manual for details.

TILE ADHESIVES

IMAGES AND VIDEOS