ARDEX X 210

· Widely applied
· Excellent adhesion
· Good workability
· Eco-friendly formulation

INFORMATION
TECHNICAL DATA
DOWNLOADS

ARDEX X 210INFORMATION

ARDEX X 210 is a polymer-modified tile adhesive manufactured using dry-mix, pre-blended technology. It can be used with thetraditional thick-bed method for installing high-absorption ceramictiles.

ARDEX X 210TECHNICAL DATA

Technical Data
The following data were measured in a standard laboratory environment at 23°C and 50% RH.
Fresh weight Approx. 1.68kg/L
Open time Approx. 20 minutes
Pot life Approx. 120 minutes
Bonding original strength ≥ 0.5 MPa
Water immersion ≥ 0.5 MPa
Heating ≥ 0.5 MPa
Freeze-thaw ≥ 0.5 MPa

ARDEX X 210DOWNLOADS

TDS

CALCULATOR

STOCKIST LOCATOR

Binder product selection

Select product：

Tile area（㎡）：

Tile specifications（mm）：

Thickness（mm）：

Packing specifications：The product is recommended to have a specification of 25 kg/ 袋

Result

Needs kilograms：

Required unit：

Bag

The above calculation formula is based on the thin paste method, and the condition of ±3mm/2m (advance plastering) is required based on the wall and ground flatness. The roughness of the groove and base layer behind the tile will have a significant effect on the amount of binder used. The amount of loss is not taken into account. Values are for reference only. Please refer to the product manual for details.

TILE ADHESIVES

IMAGES AND VIDEOS