High Performance Flooring and Tiling Products
High Performance Flooring and Tiling Products
ARDEX WPM 308 is Elastomeric Wall Coating (Façade EWC)
· Flexible, accommodates normal building movement
· Provides excellent UV resistance and long-term protection from weather
· Decorative, choice of colours
· Excellent Workability, easy to apply
· Eco-friendly, safe to use, low odour, easy clean-up
WPM 308 is a tough, UV stable, flexible, water resistant, elastomeric wall coating. It has been specifically formulated as a high-quality coating for external/exposed walls.
Façade EWC is applied as an aesthetically attractive, semismooth to textured, low sheen, uniform finish. Façade EWC dries quickly to produce a washable finish that hides imperfections
Technical Data
Appearance Viscous liquid, white or colored
Particle Dispersion Predominantly < 45μm
pH 8.7 – 9.3
Specific Gravity 1.22 g/cm³
Viscosity 22,500 – 27,500 cP
Solids(by mass) 48.3%
Solids(by volume) 36%
Priming P51, WPM300
Application Condition 10°C -30°C
Extreme(caution) Min. 5°C, Max.35°C
Touch Dry Approx. 30min-60min
Recoating Approx. 2h-3h
Dry through(2nd coat) 24h
Per coat 6m²/kg
Tensile Strength (AS1145)
after 28 days dry approx. 2.4 MPa
after 14 days approx. 2.9 MPa (UV exposure)
after 14 days approx. 5.2 MPa (dry @ 70°C)
Elongation at Break (AS1145)
after 28 days dry approx. 300%
after 14 days approx. 190%(UV exposure)
after 14 days approx. 105%(dry @ 70°C
Only WPM 300 is waterproof and moisture-proof in this list.
ARDEX WPM 300: Brush at least twice, loss is not counted.
Sheltercoat: Apply at least twice and meet 2mm thickness. Losses are not counted.
WPM308: Flat coating amount: at least twice brushing, thickness about 0.07mm, loss is not counted.
ARDEX WPS 18: Apply at least twice and meet 1.5mm thickness, loss is not counted
The values are for reference only. Please refer to the product manual for details.
STOCKIST LOCATOR
