ARDEX WPM 006 (Type I) is a two component highly flexible, under tile waterproofing membrane
· Flexible – accommodates normal building movement
· Designed for tiling systems – fully compatible with ARDEX range cement-based tile adhesives
· Breathable – permits the escape of moisture vapors from the substrate
· Easy to apply
· High Bonding strength – excellent adhesion to most substrates
ARDEX WPM 006 (Type I) is a two component highly flexible, under tile waterproofing membrane formulated to provide a tough, watertight lining for wet areas such as bathrooms, balcony, terrace and showers. ARDEX WPM 006 (Type I) is designed for under tile waterproofing applications e.g. internal wet areas, showers, kitchens, laundries, even in conditions of permanent immersion area such as swimming pools, water tank when used as an under-tile water- proofing membrane. It can be used over concrete, cement, render, screed and most of the light weight partition board or panels provided these are tiled over or render / screed protected.
Technical Data(ARDEX Quality Standards)
At 23°C and 50% RH
Wet slurry density approx. 1.5 kg/L
Solids content after mixing approx. 80%
Recoat 6-8 hours
Tiling approx.48 hours
Tensile strength
Original ≥1.2 MPa
Heating ≥80%
Alkaline ≥60%
Water immersion ≥60%
Elongation at break
Original ≥200%
Heating ≥150%
Alkaline ≥150%
Water immersion ≥150%
Bonding strength
Original ≥0.5MPa
Heating ≥0.5MPa
Alkaline ≥0.5MPa
Water immersion ≥0.5MPa
Water tightness (0.3MPa, 30min) Watertight
Low temperature bending No crack at -10°C
Only WPM 300 is waterproof and moisture-proof in this list.
ARDEX WPM 300: Brush at least twice, loss is not counted.
Sheltercoat: Apply at least twice and meet 2mm thickness. Losses are not counted.
WPM308: Flat coating amount: at least twice brushing, thickness about 0.07mm, loss is not counted.
ARDEX WPS 18: Apply at least twice and meet 1.5mm thickness, loss is not counted
The values are for reference only. Please refer to the product manual for details.