High Performance Flooring and Tiling Products
High Performance Flooring and Tiling Products
ARDEX WPM 410 is Waterplug
· high strength, durable and reliable
· Rapid Setting, suitable for quick repair
· Leakproof, outstanding protective effect
ARDEX WPM 410 is a rapid-setting mortar formulated with special cement, selected aggregates and special active additives. After mixing with water, it sets and hardens within minutes. It can
be used for reinforcement treatment at waterproofing detail areas, and for repairing holes and cracks on various cement-based material surfaces.
Notes
The amount of water used may affect the final strength, therefore do not use excessive water;
Setting time depends not only on the amount of water added, but is also closely related to the application ambient temperature;
Do not apply at temperatures below 5°C; During the entire mixing and application process, be sure to wear proper personal protective equipment;
Mix and use as needed; do not mix too much at one time;
The higher the temperature, the faster the setting speed; control the application time reasonably.
Only WPM 300 is waterproof and moisture-proof in this list.
ARDEX WPM 300: Brush at least twice, loss is not counted.
Sheltercoat: Apply at least twice and meet 2mm thickness. Losses are not counted.
WPM308: Flat coating amount: at least twice brushing, thickness about 0.07mm, loss is not counted.
ARDEX WPS 18: Apply at least twice and meet 1.5mm thickness, loss is not counted
The values are for reference only. Please refer to the product manual for details.
STOCKIST LOCATOR
