High Performance Flooring and Tiling Products
High Performance Flooring and Tiling Products
ARDEX WPS 180 is 2-Parts Flexible Waterproof Slurry
· Flexible formulation, can bridge fine cracks
· High impermeability, excellent durability
· High bond strength
· Easy to apply
· Eco-friendly
ARDEX WPS 180 is a high-compressive-strength acrylic polymer-modified cementitious flexible waterproof coating. It can be used on most substrates such as concrete and cement-sand mortar, and provides good bonding performance for subsequent works such as tiling. It accommodates surfaces with slight deformation and cracking, is vapor-permeable and provides an overall coating-type waterproof anti-seepage system. Antisettlement and easy to apply. Especially suitable for large-area waterproof coating on rigid wall and floor surfaces.
Technical Data
At 23°C and 50% RH
Wet slurry density approx. 1.97 kg/L
Solids content after mixing approx. 82%
Time to second coat approx. 4 hours
Flood test approx. 72 hours
Tiling approx. 48 hours
Compressive strength ≥24MPa
Flexural strength ≥8MPa
Bond strength ≥1.0MPa
Flexibility ≥2.0mm
Impermeability pressure approx.1.0MPa
Alkali resistance no cracking, no peeling
Heat resistance no cracking, no peeling
Freeze resistance no cracking, no peeling
Only WPM 300 is waterproof and moisture-proof in this list.
ARDEX WPM 300: Brush at least twice, loss is not counted.
Sheltercoat: Apply at least twice and meet 2mm thickness. Losses are not counted.
WPM308: Flat coating amount: at least twice brushing, thickness about 0.07mm, loss is not counted.
ARDEX WPS 18: Apply at least twice and meet 1.5mm thickness, loss is not counted
The values are for reference only. Please refer to the product manual for details.
STOCKIST LOCATOR
